法政大学学術機関リポジトリ >
010 学術雑誌論文 >
013 自然科学 >

このアイテムの引用には次の識別子を使用してください: http://hdl.handle.net/10114/10156

タイトル: 合流角度および分岐配管径が合流配管の流動励起振動に与える影響
その他のタイトル: Effect of combining angle and branch diameter for flow-induced vibration at tee connection
著者: 西口, 誠人
井土, 久雄
御法川, 学
発行日: 2015-3-25
出版者: 日本機械学会
抄録: In the process plant, random vibration with shell mode excited by the turbulence generated at tee connection might cause problems such as piping damage. Author proposed a new evaluation index in the previous work to evaluate the random vibration with shell mode at tee connection downstream and the adequacy of the index was confirmed by the experiment with 1.5 inch × 4 inch piping system with 45 deg combining tee connection so as to confirm the adequacy of the index proposed in the previous work. This paper presents the experimental study results to investigate the effects of branch size and combining angle. In the experiment the branch area ratio to the main pipe area were varied from 0.0146 to 1.00, and two combining angles, 90 and 45 degrees were examined. As a result, it was confirmed the proposed index could evaluate vibration stress adequately for wide range of the branch pipe area ratio. And the vibration stress for the piping system with 90 deg connection is around 1.4 times of that with 45 deg tee connection.
URI: http://hdl.handle.net/10114/10156
ISSN: 21879761
出現コレクション:013 自然科学


ファイル 記述 サイズフォーマット
15_Nishiguchi_Kikaigakkai_2015.03.25.pdf2.05 MBAdobe PDF見る/開く



Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - ご意見をお寄せください